Tulsa Service

Leaf Guard Installation in Tulsa, OK

Stop climbing the ladder every fall. Wilco installs Shur-Flo and LeafBlaster Pro gutter protection across the Tulsa metro — specced to your trees, your roof pitch, and Oklahoma downpours.

Tulsa homes sit under some of the heaviest leaf load in Oklahoma. Mature oaks in Midtown and Maple Ridge, sycamores along Riverside, pines and sweetgums through South Tulsa and Jenks — all of it ends up in the gutter. Once a trough packs with wet debris, water backs up over the front lip, soaks the fascia, and dumps at the foundation instead of the downspout. Leaf guards are the cheapest way to break that cycle permanently.

The catch is that not all guards work the same, and the wrong one fails loudly. Cheap plastic screens sag and collapse into the trough. Undersized mesh clogs solid under pine needles. Aggressive reverse-curve hoods overshoot during a real Oklahoma cloudburst. We install two systems we trust, and we pick between them by looking at your actual roof — not by selling whatever's on the truck.

Wilco has been hanging and protecting gutters across Tulsa and Green Country since 1979. Same family, same crews, no subcontractors. If a guard we install doesn't perform the way we said it would, you're calling the people who put it up.

What's included

On-site roof & tree assessment

We look at leaf type, roof pitch, valley dumps, and gutter size before recommending a single product.

Shur-Flo solid aluminum guards

Our workhorse system for most Tulsa homes — mounts under the shingle, handles heavy rain without overshoot.

LeafBlaster Pro micro-mesh

Surgical-grade stainless mesh for pine needles, seed pods, and shingle grit that walk right through a screen.

Gutter prep & clean-out

Every trough is cleaned, flushed, and checked for pitch before the guard goes on — no covering up problems.

Hanger & pitch corrections

Failing spike-and-ferrule hangers get swapped for hidden hangers so the run carries the added guard weight.

Downspout sizing check

Guards change how fast water reaches the outlet — we confirm 3-inch or 3x4 downspouts can keep up.

Pricing & how we quote

Leaf guards are quoted per linear foot, measured on site. Price moves with the product you choose, gutter size, roof height and access, and how much of the home you actually want covered. Plenty of Tulsa homeowners protect only the two or three elevations under trees and leave the rest bare — that's a perfectly good plan and we'll tell you so.

Estimates are free, on-site, and no-obligation anywhere in the Tulsa metro. If your existing gutters need repair or replacement before a guard makes sense, we'll price that separately and let you decide the order of operations — see gutter repair or gutter replacement.

Materials & colors

Both systems we install are built to outlast the gutter under them: Shur-Flo in heavier-gauge aluminum, LeafBlaster Pro in surgical-grade stainless micro-mesh over an aluminum frame. Fasteners are non-corroding, and guard color is matched to your existing gutter and fascia so the run still looks like one clean line from the curb.

Choosing between them? Our Shur-Flo vs. LeafBlaster Pro comparison breaks down cost, debris handling, and rain capacity, and the gutter color guide covers matching guards to a new roof or trim color.

Free on-site estimate — usually same week

We measure, spec, and quote in person. No upsells, no pressure.

Request estimate

Frequently asked questions

Do leaf guards actually stop clogs in Tulsa?

The good ones do. Tulsa's mix of oak, sycamore, pine, and cottonwood is a worst-case leaf load, and a properly specced guard turns a twice-a-year clean-out into an occasional rinse. What matters is matching the guard style to your tree load and roof pitch — a fine micro-mesh under heavy pine needles behaves very differently than a solid-top reverse-curve under oak.

Which leaf guard do you install — Shur-Flo or LeafBlaster Pro?

Both. Shur-Flo is our workhorse for most Tulsa homes: solid aluminum, mounts under the shingle, handles heavy rain without overshoot. LeafBlaster Pro's stainless micro-mesh is the better call where pine needles, seed pods, or shingle grit are the problem. We walk your roof and recommend one — see our side-by-side guide for the full comparison.

Can leaf guards be installed on my existing gutters?

Usually yes, as long as the runs are sound, correctly pitched, and hung on solid fascia. If your gutters sag, leak at the seams, or are undersized for the roof they drain, we'll fix that first — putting a guard on a failing gutter just hides the problem.

What does leaf guard installation cost in Tulsa?

Guard systems are typically priced per linear foot, and the range depends on the product, gutter size, roof height, and how much of the home you're covering. Most homeowners cover only the tree-heavy elevations rather than the whole house. Every job is measured and quoted on site — free, and with no pressure to cover more than you need.

Will a leaf guard void my roof warranty or lift my shingles?

Not the way we install them. We use manufacturer-approved mounting — under the first shingle course or fastened to the gutter lip depending on the system — so nothing is nailed through the roof field and nothing pries shingles up. We've been doing this in Green Country since 1979 and install to spec, not to speed.

Do I still need gutter cleaning after leaf guards?

Far less of it. Guards keep the bulk of leaves and debris out of the trough, but micro-mesh can still collect a film of shingle grit or pollen over several years, and valleys where two roof planes dump together always deserve a look. Plan on an occasional inspection rather than a seasonal shovel-out.

What Tulsa neighborhoods and nearby towns do you serve?

We cover the full Tulsa metro and Green Country — Midtown, Brookside, Maple Ridge, Cherry Street, Utica Square, Downtown, Riverside, South Tulsa, Kingspointe, Woodland Hills, and Southern Hills, plus Broken Arrow, Jenks, Owasso, Bixby, Sand Springs, Sapulpa, Glenpool, Catoosa, Coweta, Collinsville, Skiatook, Claremore, Bartlesville, Muskogee, Wagoner, Pryor, and everywhere in between. If you're not sure whether we cover your address, just call — we probably do.

How fast can you get to my Tulsa home for an estimate?

For most Tulsa-area addresses we can be on-site within a few business days — often the same week. Storm season fills up fast, so calling sooner puts you at the front of the schedule. Estimates are free, on-site, and no-obligation.

Are you licensed, insured, and local to Tulsa?

Yes. Wilco Guttering is family-owned and headquartered in Tulsa at 1337 East 2nd St., fully insured, and has been serving Green Country since 1979. Every crew is our own — we don't sub work out to strangers.

Do you handle Tulsa's clay soil, heavy oak leaf load, and spring hail?

That's exactly what we're built for. We size downspouts and pitch runs for Oklahoma cloudbursts, spec Shur-Flo or LeafBlaster Pro protection where oak, sycamore, or pine leaf-drop is heavy, and use heavier-gauge aluminum that shrugs off routine Tulsa hail. If a storm does damage a run, we repair it — often same week.

How do I get a fast quote in Tulsa?

Call (918) 664-8984 or use the quote form on our site. Tell us your address and what's going on with the gutters — we'll schedule a free on-site estimate, usually within the same week.

Where we work in Tulsa & Green Country

Wilco Guttering serves Tulsa and the surrounding Green Country region — 30+ towns across northeast Oklahoma including Midtown, Brookside, South Tulsa, Riverside, and every ZIP code in between. Explore the neighborhoods and coverage in each city:

Tulsa neighborhoods we serve

Every ZIP code, every home style. Jump to your neighborhood for local specs and typical gutter recommendations:

Ready for a Tulsa gutter quote?

Call (918) 664-8984 or request a free on-site estimate — most Tulsa-area homes scheduled within the same week.

Get my free estimate

Related services & guides

© 2026 Wilco Guttering · Tulsa, OKAll service areas · Tulsa neighborhoods · Gutter colors guide · Home